BETA SERIES 60 kVA - 400 kVA

BETA SERIES 60 kVA - 400 kVA

Adopting the active input power factor correction topology, the BETA series of UPS systems is one of the most energy efficient solutions for industrial and IT load power protection. Its FPGA based design ensures faster transient response performance.

  • Active power factor correction at UPS input.
  • FPGA (DSP) based double conversion topology.
  • Parallel redundancy.
  • Energy saving mode.
  • Isolation transformer at inverter output.
  • Protection against DC shoot through fault.
  • Four quadrant operation for handling regenerative loads.

 

BETA SERIES 60 kVA - 400 kVA

Technical Specifications

INPUT 
Ratings ( KVA / KW ) 60 - 400 k VA 
Nominal Voltage 380 / 400 / 415 VAC (three phase+N) 
Voltage Range 330 to 480  
Frequency 50 / 60 Hz (selectable)   
Frequency Range  40 Hz to 60 Hz   
Power Factor 0.99   
Current Distortion < 3% (while Input voltage distortion is <4%)   
OUTPUT    
Nominal Voltage 380 / 400 / 415 V AC (three phase+N)    
Frequency 50 or 60 Hz (selectable)   
Power Factor 0.9     
Voltage Regulation    
Static ±1%    
Dynamic ± 5%   
Voltage Distortion < 3% at linear load    
Overload 125% for 10 minutes   
Crest Factor 3:1   
Efficiency    
Inverter 95%    
Overall 93%     
Parallelability Up to 4 systems    
DC LINK     
Battery Voltage 672 - 720 volts    
STATIC BYPASS    
Switching Time    
Inverter Failure 2 ms   
Other Modes 0    
ENVIRONMENTAL CONDITION    
Operating Temperature 0-40°C   
Storage Temperature -20°C to +70°C (not for batteries)   
Relative Humidity 95% non-condensing    
Maximum Altitude above Sea Level 1000 meters without derating    
GENERAL     
Ingress Protection IP - 20    
PHISICAL   
k VA / KW Ratings 60/54 80/72 100/90 120/108 160/144 200/180 250/225 300/270 400/360
Dimensions in mm (W×D×H 810 × 870 × 1850 1000 × 905 × 1965 1600 × 950 × 2100 1850 × 950 × 2100
Wight (kg) 550 700 850 1000 1200 1400 1600 2000 2200
Noise Level in db <65 <65 <70  

 

Applications

  • SNMP for remote monitoring.
  • Isolation transformer at UPS input.
  • Managment software.
  • Remote monitoring for Alarms / Indications.
  • Remote emergency power off.
  • Potential free contacts for remote indications.
  • Voltage stabilizer in bypass line.
  • Battery management system.

Our Clients